kratz00's Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
http://www.alsa-project.org/

ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.24.tar.bz2\\ 
ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.24.1.tar.bz2\\ 
ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.24.2.tar.bz2\\ 
ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-1.0.17.tar.bz2

Required: [[software:xmlto]] (only alsa-utils)

====Installation====
==Alsa driver==

<code>
./configure \
   --with-moddir=/lib/modules/`uname -r`/kernel/sound/ \
   --with-kernel=/usr/src/linux-`uname -r` \
   --with-sequencer=yes \
   --with-oss=yes \
   --with-isapnp=no \
   --with-cards=hda-intel,usb-audio &&
make &&
make install</code>

If updating the driver which was installed with the Linux kernel, remove the old files before installing the new version:
<code>
rm -rf /lib/modules/`uname -r`/kernel/sound/*</code>

==Alsa lib==
<code>
./configure --enable-static --disable-python &&
make &&
make install</code>

==Alsa utils==
<code>
./configure &&
make &&
make install</code>

==Alsa oss==
<code>
./configure &&
make &&
make install</code>

==== Module loading ====

<code>
modprobe snd-hda-intel</code>

or to enable power saving

<code>
modprobe snd-hda-intel power_save=10 power_save_controller=Y</code>

==== Mixer setup ====

Playback controls is the default view after starting alsamixer, also available after pressing F3.

{{hardware:playbackcontrols.png}}


Capture controls view is available after pressing F4.

{{hardware:capturecontrols.png}}