Differences

This shows you the differences between two versions of the page.

--- hardware:ad1986a [2008/02/06 17:43] – kratz00
+++ hardware:ad1986a [2011/02/06 11:29] (current) – kratz00
@@ Line 1: / Line 1: @@
 http://www.alsa-project.org/
-ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.16.tar.bz2\\
+ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.24.tar.bz2\\
-ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.16.tar.bz2\\
+ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.24.1.tar.bz2\\
-ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.16.tar.bz2
+ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.24.2.tar.bz2\\
+ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-1.0.17.tar.bz2
+Required: [[software:xmlto]] (only alsa-utils)
 ====Installation====
@@ Line 15: / Line 18: @@
    --with-oss=yes \
    --with-isapnp=no \
-   --with-cards=hda-intel &&
+   --with-cards=hda-intel,usb-audio &&
 make &&
-make install
+make install</code>
-</code>
+If updating the driver which was installed with the Linux kernel, remove the old files before installing the new version:
+<code>
+rm -rf /lib/modules/`uname -r`/kernel/sound/*</code>
 ==Alsa lib==
@@ Line 24: / Line 30: @@
 ./configure --enable-static --disable-python &&
 make &&
-make install
+make install</code>
-</code>
 ==Alsa utils==
@@ Line 31: / Line 36: @@
 ./configure &&
 make &&
-make install
+make install</code>
-</code>
+==Alsa oss==
+<code>
+./configure &&
+make &&
+make install</code>
 ==== Module loading ====
-<code>snd-hda-intel model=laptop</code>
+<code>
+modprobe snd-hda-intel</code>
+or to enable power saving
+<code>
+modprobe snd-hda-intel power_save=10 power_save_controller=Y</code>
 ==== Mixer setup ====