Differences

This shows you the differences between two versions of the page.

--- hardware:pinnacle_pctv_hybrid_pro [2007/12/20 21:21] – kratz00
+++ hardware:pinnacle_pctv_hybrid_pro [2010/03/23 18:42] (current) – kratz00
@@ Line 1: / Line 1: @@
-Get the unstable/testing tree (interesting for testing new features):
+==Pinnacle PCTV Hybrid Pro Stick 320e==
-<code>
+ID eb1a:2881 eMPIA Technology, Inc.
-hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental &&
-cd v4l-dvb-experimental
-</code>
-or for the stable tree:
+Support for V4L and DVB in the Linux kernel is needed.
-<code>
+|**Linux Kernel Configuration:** //Device Drivers -> Multimedia devices//  |
-hg clone http://mcentral.de/hg/~mrec/v4l-dvb-kernel &&
+|<code>
-cd v4l-dvb-kernel
+    *** Multimedia core support ***
-</code>
+<M> Video For Linux
+[*]   Enable Video For Linux API 1 (DEPRECATED)
+-*-   Enable Video For Linux API 1 compatible Layer
+<M> DVB for Linux
+    *** Multimedia drivers ***
+[*] Load and attach frontend and tuner driver modules as needed
+...
+</code>|
 <code>
+hg clone http://linuxtv.org/hg/v4l-dvb/ &&
+cd v4l-dvb &&
 make
 </code>
-Firmware is required for this card (SHA1 hash: 792193b3e073c27d1d2eccebc72ec9ad1b6950a6  firmware_v3.tgz)
-<code>
-http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz
-http://www.tuxamito.com.es/em2880/firmware_v3.tgz
-</code>
 Installation:
 <code>
 make install
-tar xvf firmware_v3.tgz -C /lib/firmware/
 </code>
-/etc/udev/rules.d/dvb.rules
+=== Setup ===
+Right now my stick is not detected automatically
 <code>
-KERNEL=="dvb*", PROGRAM="dvb %k", NAME="%c", GROUP="video"
+modprobe em28xx card=53
 </code>
-/lib/udev/dvb
+Install firmware, following this instructions:
 <code>
-#!/bin/sh
+wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip &&
-/bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\
+unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys &&
-\3,'
+wget http://linuxtv.org/hg/v4l-dvb/raw-file/tip/linux/Documentation/video4linux/extract_xc3028.pl &&
+perl extract_xc3028.pl
+cp xc3028-v27.fw /lib/firmware</code>
+===== remote control =====
+cat /proc/bus/input/devices
+<code>
+I: Bus=0003 Vendor=0000 Product=0000 Version=0000
+N: Name="em2880/em2870 remote control"
+P: Phys=USB
+S: Sysfs=/devices/virtual/input/input9
+U: Uniq=
+H: Handlers=kbd event9
+B: EV=100003
+B: KEY=c0000 100040 0 0 0 0 0 180 80000001 9e0000 0 40000 ffd
 </code>