kratz00's Wiki

User Tools

Site Tools

You are here: start » hardware » medion_p4410
hardware:medion_p4410

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hardware:medion_p4410 [2009/01/18 20:21] – kratz00hardware:medion_p4410 [2010/01/13 20:39] (current) – kratz00
Line 18: Line 18:
 Make sure: Make sure:
   * ppp_generic is loaded (if compiled as module) and ///dev/ppp// exists   * ppp_generic is loaded (if compiled as module) and ///dev/ppp// exists
 +  * fuse is loaded (if compiled as module) and ///dev/fuse// exists
   * that the D-Bus Messagebus Daemon and the HAL Daemon are running   * that the D-Bus Messagebus Daemon and the HAL Daemon are running
   * the device is switched on   * the device is switched on
Line 77: Line 78:
  
 ===== Mounting the device ===== ===== Mounting the device =====
- 
-:!: There is either a bug in [[software:librapi2]] or [[software:Fur]] so we have to run [[software:Fur]] with the -s option, disabling the thread enabled main loop in fuse in favour of a serial one. 
  
 <code> <code>
Line 87: Line 86:
 As user kratz00 do this, to mount the filesystem on the pna: As user kratz00 do this, to mount the filesystem on the pna:
 <code> <code>
-Fur -s /mnt/pna+Fur /mnt/pna
 </code> </code>
  
hardware/medion_p4410.1232306472.txt.gz · Last modified: (external edit)