Differences

This shows you the differences between two versions of the page.

--- hardware:lg_g2 [2015/09/27 21:21] – kratz00
+++ hardware:lg_g2 [2018/01/06 20:01] (current) – kratz00
@@ Line 1: / Line 1: @@
   * https://dl.twrp.me/g2d802/
-  * http://www.cmxlog.com/12.1/d802/
+  * https://wiki.lineageos.org/devices/d802#get-lineageos-for-the-lg-g2-international
-  * http://download.cyanogenmod.org/?device=d802
+  * https://download.lineage.microg.org/d802/
-  * http://wiki.cyanogenmod.org/w/Install_CM_for_d802
+====== Enter Recovery Mode ======
+:!: Make sure you have installed a custom recovery before
+  * Switch the phone off
+  * Hold the 'Volume Down' + 'Power' buttons
+  * As soon as the LG logo appears, release the two buttons and press/hold  them again
+  * In the 'Factory hard reset' screen press the 'Power' button twice to actually enter the installed recovery system
+====== Update custom recovery ======
 <code>
-./platform-tools/adb push /tmp/cm-12.1-20150927-NIGHTLY-d802-recovery.img /data/
+./platform-tools/adb root
+./platform-tools/adb push /tmp/cm-13.0-20160530-NIGHTLY-d802-recovery.img /data/
 ./platform-tools/adb shell
-dd if=/data/cm-12.1-20150927-NIGHTLY-d802-recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery bs=1m
+dd if=/data/cm-13.0-20160530-NIGHTLY-d802-recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery bs=1m
-rm /data/cm-12.1-20150927-NIGHTLY-d802-recovery.img
+rm /data/cm-13.0-20160530-NIGHTLY-d802-recovery.img
 exit
 ./platform-tools/adb reboot recovery
 </code>
+====== Display Panel detection ======
+Check output of //cat /proc/cmdline//
+  * LCD_RENESAS_LGD = 0 (lcd_maker_id=0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_g2_lgd_cmd)
+  * LCD_RENESAS_JDI = 1 (lcd_maker_id=1 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_g2_jdi_cmd)